# Adding Links To Instagram Bio, Guide
**Welcome to ToyBoxAccounts.com | Partnering with InstaFlow from ClickCoreLabs**\
**Official Guide to Safely Adding Links to Instagram Accounts**
\
This guide will walk you through best practices and key strategies for adding links without triggering bans or detection. You’ll learn how to minimize the risk of mass suspensions when linking multiple accounts, especially when using the same domain or URL structure. Understanding how Instagram detects link patterns is crucial for keeping your accounts safe and active.
**Disclaimer:** While this guide is designed to significantly reduce the chances of suspensions and maximize account performance, it’s important to understand that occasional bans or restrictions may still occur, even if all steps are followed perfectly. Instagram frequently rolls out new updates and algorithm changes that can affect account behavior. The purpose of this guide is to help limit these risks and keep your accounts running at optimal speed.
**Step 1: Ensure Your Account Is Fully Warmed Up**
Before adding any links, make sure your Instagram account has been properly warmed up. If you haven’t completed this step yet, head over to “Instagram Account Warmup & Safe Login Guide" to understand the right timing and conditions for safely adding a link.
Instagram Profiling and Warmup Guide
**Step 2: Choose a Link Provider**
Next, you’ll need a solid link provider to keep your accounts safe. We recommend [GetAllMyLinks](https://try.getallmylinks.com/), a platform that lets you create custom bio links for your Instagram accounts. This is especially important when managing multiple profiles, as using the same link across too many accounts on the same IP can trigger Instagram’s detection systems. As a general rule, you can safely use the same link on up to 4 accounts sharing the same IP address. That being said; I highly recomand that you have 1 link per account since that will ensure that your profile stays as safe as you can make it. Even though having 4 accounts share the same link is still fine; sometimes you have to see if its more benefical to actually just have 1 seperate link for each profile so that you can ensure the safety of the profile. Check out GetAllMyLinks:
GetAllMyLinks
**Step 3: Account Warmip and Proxy Rotation Pre-Reading**
\
Now comes the actual process of adding the links to your Instagram accounts, but this step needs to be done with caution. When editing each account to insert the bio link, you must save the changes using a different IP address for each account. This is critical. Even if the accounts end up sharing the same IP later on, the initial “Save Changes” action (when the link is added) must happen on a unique IP to avoid Instagram linking the accounts together.
In case you are unsure of what I am referring to; go over the "Instagram Warmup & Safe Login Guide"; and read over the "Proxy Setup" section. These two sections will help explain what a proxy is; why its important when adding links; and when is the correct time to add the link when profiling the account. I will cover that here aswell; however it is best to actually get a through understanding of these things I mentioned above so that you can fundamentally understand the importance behind this steup in case its not clear already.
Account Setup Section
Proxy Section
That being said; you want to add the Links to each profile on the 11th Day during the warmup procdure. It is vital that you follow the wamrup procdurue very carefully; espcaily since in the case you do any step prematruely; you might get a verficaiton block. Anytime you receive one of those; you are going to have to preform the verfication process and appeal the accounts. In most cases; you want to avoid such scenario since its another process that requires you to preform face verfication; use sms rental number services and approval time; and often times; the success rate of reviving the account is around 50%. That being said; there might be new methods that come out to make that process more streamlined; however for our case at this moment; it is best to carefully warmup the accounts and add the link on the 11th day.
Here are two ways to do this:
**Step 4: Safely Add Links to Each Account**
Now that you have an idea regarding why having a unqiue IP is so important when it comes to adding links to each profile and ensuring the accounts dont get linked; I will now walk you though some of the ways you can achive IP rotation and suscuflly add the links to each of the accounts.
**Method 1:** Using SIM Cards + Airplane Mode
In the case that you have a dedicated Simcard inserted into each device; you can then use the "AirPlane" mode to toggle IP rotation. Once again; this is typcially used for agencies that actully have dedicated simcards with data plans inserted in each device; in our case (or most cases for agenceis; we would do it a bit differently. This will be coming up further below).
\
You want to Insert a SIM card into each device and toggle Airplane Mode on and off before saving changes. This forces the device to reconnect to a new cell tower, refreshing the IP address. This is one of the easiest ways to rotate IPs on real devices.
**Once you toggle AirPlane Mode; on and off; you can now go to each dedicated Instagram Clone and update the link within each Instagram profile:**
The important thing to ntoe here is; when you go to the next profile; you want to toggle the AirPlane Mode again so that you can retrive a new IP; so that when you add a new link to the next account; it doesnt get linked to the previous one since the IP's will be different.
An important thing to note here is; it is fine for the accounts to share the same IP when it comes to preforming actions such as likes; comments and follows (Given that you are using a 4G proxy which is ok to house 40-80 accounts); its only when you Login, Update Name, Username, Bio, profile Picture, or adding links; for when you need to rotate the IP. Once those changes are complete; you can then have the accounts share the same IP (or in this case; stop further AirPlane Mode Toggle).
**Method 2:** Using a 4G Proxy + Proxy App
\
Alternatively, you can use a 4G proxy with a proxy app like SuperProxy installed on your device. Once again; incase you are unsure of what a proxy is, and what kind of setup we and other agencies we work with are running; I suggest that you go over this section to familzarize yourself with the setup so that this all makes sense.
Insert Proxy Section
Insert Any Xproxy Hardware Section (If needed)
The first thing you want to do is head over to the SuperProxy App and Insert your proxy credenials. Keeping in mind; your proxy provider is resposble for providing you with the right information in order for you to succfully connect your device to your proxy.
You want to Connect the proxy through the app, and manually rotate the IP via your proxy provider’s dashboard before saving changes on each account. This ensures each “Save” happens on a fresh IP, keeping your accounts safe and unlinked.
**Step 4: Let the Account Rest**
\
Once you’ve added the link, let the account sit for at least 24 hours before taking any further action. Even though you used a unique IP during the “Save Changes” process, once you stop toggling Airplane Mode (SIM card method) or disconnect from the proxy (proxy method), the accounts may start sharing the same IP again. its only when you Login, Update Name, Username, Bio, profile Picture, or adding links; for when you need to rotate the IP. Once those changes are complete; you can then have the accounts share the same IP (or in this case; stop further AirPlane Mode Toggle).
Letting them rest gives Instagram time to process the changes and reduces the chance of accounts being linked through sudden activity spikes or shared IPs. Patience here goes a long way in protecting your entire network.
**Resources:**
Aged Instagram Accounts: [ToyBoxAccounts.com](http://toyboxaccounts.com)
ToyBoxAccounts Telegram Channel Link:
Instagram Real-Device Software: InstaFlow | ClickCoreLabs.com
Screencasting Software: Multi-Screen.com
Additional Resources: (Insert Link To Resource Section of Real-device-automation guide)\
\
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://toyboxmarketing.gitbook.io/guides/readme/adding-links-to-instagram-bio-guide.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.